12.
13.
www.gtpower.co.nz
www.gtpower.co.nz
GT5500D
Preparation before
Operating
NOTE: Pre-operation checks should
be made each time before operating.
WARNING: The engine and muffler
will be very hot after the engine has
been running. Avoid touching the
engine and muffler while they are
still hot with any part of your body or
clothing during inspection or repair.
Ground (Earth) Terminal
The Ground (Earth) terminal purpose is to
connect the generator frame to a ground-
ing point such as an earth stake to prevent
against electric shock from the generator
frame in the case of a short circuit or other
electrical malfunction of the generator or
the connected load. It is not required to be
connected for operation of the generator,
it is an additional safety feature. If in doubt
if grounding protection is required for your
application, please check with a registered
electrician as to your local regulations.
Assembling the
Generator
Wheel assemblies are included for the
convenience of moving the generator. You
will need the following tools:
Please install the handle, rubber feet and
wheel on the base plate and tighten the
bolt as shown in the following picture:
Summary of Contents for GT5500D
