background image

24.

25.

www.gtpower.co.nz

www.gtpower.co.nz

GT5500D

Warranty

Whilst every effort is made to ensure your complete 

satisfaction with this tool, occasionally, due to the mass 

manufacturing techniques, a tool may not live up to our 

required level of performance and you may need the 

assistance of our service department.
This product is warranted for a 12 month period from the 

date of the original purchase. If found to be defective in 

materials or workmanship, the tool or the offending faulty 

component will be replaced free of charge with another of 

the same item. A small freight charge may apply. Proof of 

purchase is essential. 
We reserve the right to reject any claim where the 

purchase cannot be verified.This warranty does not 

include damage or defects to the tool caused by or 

resulting from abuse, accidents or alterations. It also 

does not cover any bonus items or included accessories. 

Only the generator is covered under this warranty. 
Please ensure that you store your receipt in a safe place. 

Conditions apply to the above warranty.

1.  DURATION: The manufacturer warrants that it will  

  repair or replace, at no charge for parts or labour, the  

  GT POWER Generator, if proven defective in material  

  or workmanship, during the following time period(s)  

  after date of original retail purchase:

  For 1 Year: 

  The GT POWER GT5500D Generator 

  (excluding accessories)

2.  WHO GIVES THIS WARRANTY (Warrantor):
  EUROQUIP NZ and EUROQUIP AUSTRALIA
  Visit www.gtpower.co.nz for service requirements and  

  to register your warranty.

3.  WHO RECEIVES THIS WARRANTY (Purchaser): 
  The original purchaser of this GT POWER Generator

4.  WHAT IS COVERED UNDER THIS WARRANTY:  
  Defects in material and workmanship which occur  

  within the duration of the warranty period.

5.  WHAT IS NOT COVERED UNDER THIS WARRANTY:
  A.  Implied warranties, including those of    

   

merchantability and FITNESS for a particular  

   

purpose are limited in duration to this express  

   

warranty. After this period, all risks of loss, from  

   

whatever reason, shall be on the purchaser.

  B.  ANY INCIDENTAL, INDIRECT, OR  

 

CONSEQUENTIAL LOSS, DAMAGE, OR  

EXPENSE THAT MAY RESULT FROM ANY  

DEFECT, FAILURE OR MALFUNCTION OF THIS  

PRODUCT.

  C.  This warranty does not apply to any accessory 

or consumable items included with the product 

which are subject to wear from usage; the repair 

or replacement of these items shall be at the ex-

pense of the owner. These items include, but are 

not limited to: seals, o-rings, recoil starter parts, 

etc. In addition, this warranty does not extend to 

any damage caused by the untimely replacement 

or maintenance of any of the previously listed 

CONSUMABLE parts.

  D.   Any failure that results from accident, purchaser’s 

abuse, neglect or failure to operate products in ac-

cordance with instructions provided in the owner’s 

manual(s) supplied with the product.

  E.  Pre-delivery service, i.e. assembly and adjustment.

6.  RESPONSIBILITIES OF WARRANTOR UNDER THIS

  WARRANTY:  Repair or replace, at Warrantor’s option,

  products or components which have failed within

  duration of the warranty period.

7.  RESPONSIBILITIES OF PURCHASER UNDER THIS  

 WARRANTY:
  A.   Please call your re-seller or the number listed 

above for warranty assistance.

  B.   Provide dated proof of purchase and maintenance 

records.

  C.   All generators must be delivered or shipped to the 

nearest Service Agent or re-seller. Freight costs, if 

any, must be borne by the purchaser.

  D.   Use reasonable care in the operation and mainte-

nance of the products as described in the owner’s 

manual(s).

  E.   No warranty costs incurred will be considered for,  

   

or covered if Euroquip has not been contacted  

   

and prior permission for repair / replacement has  

   

been granted.

8.  WHEN WARRANTOR WILL PERFORM REPAIR OR  

  REPLACEMENT UNDER THIS WARRANTY: 
Repair or replacement will be scheduled and serviced 

according to the normal work flow at the servicing 

location and depending on the availability of replacement 

parts.

Summary of Contents for GT5500D





























Reviews: