6
3.0 -
DESCRIPTION OF THE PROGRAMMABLE FUNCTIONS
4.0 - SET FUNCTIONS
WARNING:
- The alarm system must be disarmed.
1- Leave bonnet and the driver’s door opened.
2 - Turn the ignition key ON and leave it switched on for the whole procedure.
3 - Press the LED BUTTON until the system will emit a visual signal (indicators) and a long
acoustic signal to indicate that you have entered the SET FUNCTIONS mode. The LED
BUTTON will start flashing to indicate that it is possible to program/modify the alarm system
functions. If within 2 minutes the SET FUNCTIONS isn’t modified, the system will visualize
the SET FUNCTIONS condition and it will show their state in that moment by a flashings
sequence of the LED BUTTON, as indicated in the table below.
3.1 - Self-coding vehicle indicators impulses number.
When you enable this function it is possible to self-code the indicators flashes number to the
alarm system when doors are locking (system arming) and when doors are unlocking (system
disarming).
3.2 - Switches/Discriminators signals stabilizer.
When you activate this function it is possible to recognize these signals to the alarm system
if they would be of impulsive type (polling).
3.3 - Memorisation of switches/discriminators signals only after actuator signals.
When you enable or disable this function it is possible to decide if introduce the conditions for
vehicles with impulse switch after the actuator.
3.4 - Memorisation of actuator signals of changeable type.
When you enable or disable this function it is possible to decide if introduce the conditions for
vehicles with changeable actuator impulse switch.
3.5 - Anti-hijack door signal stabilizer.
When you activate this function it is possible to recognize to the alarm system these signals
if they would be of impulsive type (polling).
3.6 - Acoustic signal when arming/disarming the alarm system.
When you activate or deactivate this function it is possible to have the acoustic signal on
arming and disarming. This function is valid for vehicles with flashing indicators when the
original CDL is operated.
3.7 - Visual signal when arming/disarming the alarm system.
When you activate or deactivate this function it is possible to have visual signals on the
vehicles indicators on arming and disarming.
3.8 - Courtesy light switching on when disarming.
When you activate or deactivate this function it is possible to have the courtesy light switching
on for 15 seconds when disarming the alarm.
