manualshive.com logo in svg

GSS STS 1916 IPSR CT CI, Assembly Instruction Manual

Share
Download
GSS STS 1916 IPSR CT CI Assembly Instruction Manual Download Page 7

 

 

- 7 - 

STS 1916 IPSR CT CI

 

Over all output data

Data rate: .......................................................................... ≤ 820 MBit/s
Remapping ................................................................... SIDs, TS-/ON-IDs
Services:..................................................................................max. 256
PCR Corrections: ......................................................................max. 256
EIT: .........................................................................................max. 256

 

IPTV Output

SPTS ...............................................................................................128
IGMP ................................................................................................V2
Protocols: .......... UDP (User Data Protocol), RTP (Real-Time Transport Protocol)

 

"iP -> Ct" 

Part

 

Data input

Streams ...................................................................................128 SPTS
IGMP ................................................................................................V2
Protocols: .......... UDP (User Data Protocol), RTP (Real-Time Transport Protocol)

 

Input data

Maximum over all input data rate (∑ lines 1-128): ..................... 900 MBit/s
Buffer memory .............................................................................. 1 GBit

(corresponds e.g. at 128 x 6 MBit/s to approx. 128 x 6 ms buffer)

 

RF output QAM

 (suitable for adjacent channels; symbol rates and modulation individually adjustable)

Frequency range: ............................................. 42.0 MHz … 868.0 MHz 
Types of modulation: ..................................QAM 4, 16, 32, 64, 128, 256
Output level: ......................................................................80…96 dBμV 
Dynamic phase error: ................................................................... < 0.2 ° 
MER: .........................................................................................> 45 dB 
Output impedance: .........................................................................75 Ω
Symbol rate: ................................................................ 1000…7500 kBd

 

RF output COFDM

 (suitable for adjacent channels; modulation individually adjustable)

Frequency range: ............................................. 42.0 MHz … 868.0 MHz 
Types of modulation: ........................................ QPSK, 16 QAM, 64 QAM
Transmission modes ............................................................................ 2k
Code rates ....................................................... 1/2, 2/3, 3/4, 5/6, 7/8
Guard intervals .................................................... 1/4, 1/8, 1/16, 1/32
Output level: ......................................................................80…96 dBμV
Output impedance: .........................................................................75 Ω

Summary of Contents for STS 1916 IPSR CT CI











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands