GSS STS 1916 IPSR CT CI, Assembly Instruction Manual

Page: 40 / 74

- 40 - STS 1916 IPSR CT CI
C
onfigur ation menus
"iP -> Ct"
Part
i
nPut
Here you make the settings for the IPTV input data streams.
Please note that the maximum total input data rate that can be processed
is 900 MBit/s.
If the sum of the input data rates of all input lines exceeds
900 MBit/s (
106
), you must switch off corresponding input lines
100
!
—> Via the background colour of column Line you are informed about
the quality of the input signals ( good/ no signal) or whether
the input is switched off ( ).
101 100
102 103 104
107
106
105
100
In column Input you can
deactivate the input of not
used lines. This prevents
unwanted/unnecessary
data traffic on the network.
If the sum of the input data
rates of all input lines ex-
ceeds 900 MBit/s (
106
),
you must switch off corre-
sponding input lines
100
!
101
Herein the Service Name
is displayed.
102
In the IP Address column,
type the multicast IP ad-
dress of the IP stream that you want to receive.
—> Multicast IP addresses must NOT be used twice.
103
In the Port column, type the port to the multicast IP address of the IP
stream.
104
The TS and ON IDs of the stream are displayed in the TS / ON ID column.