GSS DRS 550 HDMI, Operating Instructions Manual

Page: 32 / 68

- 32 - - 32 -
8.5.5 Setting DiSEqC
The satellite receiver can be operated on cascadable DiSEqC switches. In the menus
“
Primary DiSEqC ” and “ Primary DiSEqC Input ” you can set the DiSEqC type and the
input allocation for each DiSEqC switch.
• In the menu “ Antenna Settings ” use
▼
/
▲
to select the
line “ Primary DiSEqC ” and confirm using OK .
• In the selection menu use the
▼
/
▲
buttons to select the
desired operating mode and confirm using OK .
—> If “ None ” is activated, then the menu “ Primary
DiSEqC Input ” is inactive.
Setting DiSEqC input
• In the menu “ Antenna Settings ” use
▼
/
▲
to select the
line “ Primary DiSEqC Input ” and confirm using OK .
• In the selection menu which appears use the
▼
/
▲
buttons
to activate the desired input for the satellite selected in
the menu point “
Satellite ” and confirm using OK .
Examples:
Receiving signals from a single satellite
• In the menu “ Antenna Settings ” activate line “ Satellite ”
using
▼
/
▲
and confirm using OK .
• In the selection menu, use
▼
/
▲
to select the desired
satellite and confirm using OK .
• Use
▼
/
▲
to select “ LOF Low Band ” and confirm using OK .
• In the selection menu, use
▼
/
▲
to select the lower oscil-
lator frequency of the LNB and confirm using OK .
• Use
▼
/
▲
to select “ LOF High Band ” and confirm using OK .
• In the selection menu, use
▼
/
▲
to select the higher oscil-
lator frequency of the LNB and confirm using OK .
• Use
▼
/
▲
to select “ Band Switching ” and confirm using OK .
• In the selection menu, use
▼
/
▲
to select “ Auto ” and con-
firm using OK .
• Use
▼
/
▲
to select “ Primary DiSEqC ” and confirm using OK .
• In the selection menu use
▼
/
▲
to select “ None ” and
confirm using OK .
• To exit the menu, see chapter 8.1.8, page 22.
Receiving signals from 2 or more satellites
• In the menu “ Antenna Settings ” activate the line “ Satellite ”
using
▼
/
▲
and confirm using OK .
• In the selection menu use
▼
/
▲
to select the desired satel-
lite and confirm using OK .
• Use
▼
/
▲
to select “ LOF Low Band ” and confirm using
OK .
OK
Antenna Settings
Exit
Back
Delete Satellite
Insert Satellite MENU
Z
LOF High Band
LNB Type
Primary DiSEqC Input
Primary DiSEqC
Signal quality
Universal
19,2°E ASTRA 1F,G,H,KR,L
9750
10600
Auto
None
A
Signal strength
Satellite
LOF Low Band
Band Switching
None
Mini DiSEqC
DiSEqC 1.0
DiSEqC 1.1