ENGLISH
5
Connecting a satellite receiver
5.1
Connecting the satellite antenna
• Connect antenna cable of the satellite antenna to the con-
nector
1
of the satellite receiver (screw connection, F-
connector).
—> On the connector
2
( loop-through output), you can
connect an additional satellite receiver. Conditions
of reception do however depend on the settings
(page 29) of the first satellite receiver.
5.2
Connecting the television
Connecting the television using the SCART cable
• Connect the socket
4
of the satellite receiver using a
standard SCART cable to the corresponding SCART sock-
et on the television.
Connecting the television using the Cinch cable
• Connect the video output
7
and the audio output sock-
ets
8
and
9
of the satellite receiver to the correspond-
ing sockets of your television set using standard Cinch
cables.
Yellow –
Video signal (CVBS)
7
Red –
Audio signal (right)
8
White –
Audio signal (left)
9
Connecting the television using HDMI
• Connect the HDMI socket
5
of the satellite receiver to
the HDMI socket of your television set using the cable
enclosed.
