ENGLISH
8.4
Setting the time and date
This menu allows you to set the following parameters for the time and date:
- System
time
- Date
- Local
time
- Time
zone
- Daylight saving changeover
Next to the menu line all the relevant, current settings can be viewed. The lettering in
non-active lines is displayed in grey.
8.4.1 Setting
the
system time
System time refers to the local time and the date stored in the operating software.
These can be set manually and automatically. The automatic setting transfers the time
and date from data stream of the channel currently active.
To ensure the Electronic Program Guide ( EPG) displays the current programs at the
right time, you must enter the local time, the date and the time zone.
The default settings for the date and time setting are automatically set to “
On
”. You can
also set these manually.
• In the menu “
Settings
” use the
▼
/
▲
buttons to activate
the line “
Time/Date
” and confirm using
OK
.
—> The menu “
Time/Date
” appears with the active line
“
Automatic Time Update
”.
• Confirm line “
Automatic Time Update
” using
OK
.
• In the selection menu which appears, use the
▼
/
▲
buttons to select the desired setting “
On
” or “
Off
”.
—> Setting “
On
”.
Time and date are automatically transferred from
the data stream of the channel currently selected.
The lines “
Date
” and “
Local Time
” are displayed in
grey lettering and are therefore inactive.
—> Setting “
Off
”.
Date and time must be set manually (s. chapter
8.4.2 and 8.4.3).
• Confirm the setting using
OK
.
Date
Automatic daylight saving time
Time zone
Automatic Time Update
On
15. Aug. 2008
09 : 18
Amsterdam GMT + 1
On
Local Time
Time / Date
OK
Exit
Back
MENU
Z
OK
Date
Automatic daylight saving time
Time zone
Automatic Time Update
On
24 : 01 : 2008
13 : 18
Amsterdam GMT + 1
On
Local Time
Time / Date
On
Off
Exit
Back
MENU
Z
