Page 4 of 4
Model:
REC - 1240
REC - 1260
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
24V to 12V
Reducer / Equalizer / Charger
Operating Instructions
Please read these instructions before use
REC-R2
REC - 1240
REC – 1260
Input Voltage [ VDC ]
23VDC to 30VDC
Charger Mode
Output Voltage (Absorption/Float) [ VDC ]
13.5VDC ± 1%
Output Voltage (Bulk) [ VDC ]
14.5VDC ± 1%
Equalizer Mode
Output Voltage
½ Input Voltage ± 3%
Reducer Mode
Output Voltage
13.5VDC ± 1%
Greater than 85%
Bulk Charge Current [A]
40A
60A
Stand – By Current [mADC]
20mA
Features
Short Circuit Protection
Battery Reversal Protection
Over Voltage and Thermal Protection
Dimensions [ L x W x H]
313mm x 175mm x 65mm
313mm x 175mm x 65mm
Weight
2.5Kg
2.6Kg
Equalizer Mode -
Output LED:
This LED indicates the power output of the Equalizer
A)
Current output less than 1amp. This would indicate that the battery is equalized
B)
or the unit has just entered current limit. A solid output LED indicates that the unit is operating with in the nominal range.
The LED will remain off when either:-
A)
The Ignition Wire is disconnected.
B)
Output Over Voltage or Thermal Protection
Warranty Conditions:
Our products come with guarantees that cannot be excluded under the Australian Consumer Law.
The customer is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
The customer is also entitled to have the products repaired or replaced if the products fail to be of acceptable quality and the failure does not
amount to a major failure.
GSL Electronics (GSL) warrants that its products will, under normal use and service, be free of defects in material and workmanship for a
period of two (2) years from the date of the original purchase by the customer as marked on the customer’s original invoice. Please refer to our
website for full warranty and return information which can be found at http://www.gsl.com.au/faq.html
