Page 2 of 4
Model:
REC - 1240
REC - 1260
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
24V to 12V
Reducer / Equalizer / Charger
Operating Instructions
Please read these instructions before use
REC-R2
for Battery Charger Mode
Changing Opperating Modes:
Located on the rear of the unit, the opposite end to the output terminals. The switch is used for adjusting the mode of
opperation. Caution : This should only be done before installing the unit. Do not change modes with out reconfiguring
the wiring as per the diagrams below. Fig.1 for Charger, Fig 2. for Reducer and Fig 3. for Equalizer
Fig 2. Typical Installation Diagram for Reducer Mode
Input
Input
Output
Output
Ground
Ground
Control
Control
