4. Assembly
34
PNEG-1333
Turkey Poult Feeder System
Shocker Wire Installation (Continued)
7. Use two (2) AZUMA nuts and bolts to connect a jumper wire from last section of shocker wire to the
anti-roost guard as shown in
. This wire is in close proximity to metal parts so an insulated,
12 gauge, single strand wire must be used.
Figure 4AS
8. After the shocker wire has been installed to the entire feed line, connect the circuit between the
shocker wire and shocker electrical control unit (See wiring instructions
included with the
shocker electrical control unit.)
NOTE:
Make certain that the jumper wires do not come into contact with any metal parts (auger tube,
insulator brackets, etc.).
Ref #
Description
A
Anti-Roost Guard
B
Jumper Wire
C
Azuma Nut
Summary of Contents for Cumberland PNEG-1333
Page 1: ...PNEG 1333 Turkey Poult Feeder System Installation and Owner s Manual PNEG 1333 Date 07 21 14...
Page 46: ...6 Parts List 46 PNEG 1333 Turkey Poult Feeder System Turkey Poult Feeder Assembly C2000070...
Page 65: ...PNEG 1333 Turkey Poult Feeder System 65 7 Wiring Diagram End Control Box i Plus3 C2000535...
Page 66: ...66 PNEG 1333 Turkey Poult Feeder System NOTES...
