GSi Agri-Alert 128 Touch, Installation And Configuration Manual

Page: 43 / 120

Chapter 6: System Configuration
3. Clearly state the name of the system.
NOTE: The amount of time remaining to record the name is displayed at the bottom of the page.
4. Press on the black square to stop recording. You can listen to the recording by pressing the play
button.
5. If you want to delete the recording, press on the garbage icon .
6. Repeat steps 2 through 4 to record the system name in another language.
Setting the System Trouble Recognition and Recovery Times
By setting the recognition and recovery times for system troubles, the system waits the recognition time
before going into trouble state, and then waits for the system to return to a normal state for the amount of
time indicated in the recovery time before coming out of a trouble state.
1. Click on Menu→System→Settings→Status and ID .
2. In edit mode, under the General tab, set the desired System trouble recognition time and System
trouble recovery time .
Viewing and Resetting Output Circuits
If an output is tripped it is detected by the system and can be reset.
1. Click on Menu→System→Settings→Status and ID .
2. In edit mode, under the General tab, click on Reset output circuits prot. if the Output circuits pro-
tection is tripped.
895–00677 Agri Alert 128 Touch 43