7. Install the electrical conduit (14) from the blower to junction box (15). Secure conduit with 1/2 in.
clamp (HH-1096).
8. Install the electrical box to the gusset plate using four screws (S-995) and hex nuts (S-7931).
DANGER
Make sure all power is locked out before beginning the work.
9. Install the wires through the electrical conduit (14) and connect the electrical wires according to the
appropriate wiring diagrams. For wiring diagrams, refer to the
Figure 7-8 to Figure 8-11, page 51
Figure 7-5
Conduit layout
5
Blower assembly (D04-1016)
14
Electrical conduit
11
Pipe conduit (D04-1023)
15
Junction Box
13
Hose clamp (AP-0583)
16
Flexible hose (D01-2973)
NOTE:
If the dryer has an auger extension, an additional piece of flexible hose (D03-1190) will be
required. The longer lengths can be created by twisting one end of hose into another and ensuring
the couplers are not necessary to extend the hose. Also, D03-1199 (12-15 in. hose clamp) can be
used to support the flex hose by securing it to the auger extension.
48
PNEG-2132
Pressure Cooled Quiet Portable Dryer
