Chapter 6: Installing the Wet Bin
• For dryers 12 ft. (2.66 m) or longer, turn the turnbuckles on the lift kit (2).
Figure 6-2
Turnbuckle location for dryers 12 ft. (2.66 m) and longer
2
Lift kit turnbuckles for 12 ft. (2.66 m) and longer dryers
2. Bolt the top angle brackets (4) to the angle brackets already installed, positioning the brackets
back-to-back. Brackets are located on the front and rear of the dryer, refer to the
.
3. Bolt the load auger housing channel (3) to the front and rear of the ends of the dryer wet bin.
Figure 6-3
Angle brackets and housing channels
3
Top auger housing channel
4
Top angle bracket
4. Once the auger assembly is securely bolted, unbolt the lift kit legs and lower them back into their
shipping position.
38
PNEG-2132
Pressure Cooled Quiet Portable Dryer
