4. Roof Assembly
20
PNEG-2145
21' Diameter Gamma Roof Assembly Instructions
Attaching the Peak Ring Attach Clips to the Rafter
Peak ring attach clips secure the rafter to the peak ring weldment.
What You Should Know
Each roof rafter receives two (2) peak ring attach clips.
1. Determine the correct orientation of each rafter (A) by identifying the roof panel holes (E) located near
the end of each rafter (A).
2. Install peak ring attach clips (B) to both sides of the roof rafter (A).
3. Use flange bolts (C) and flange nuts (D) to secure the peak ring attach clips (B) to the rafter (A).
Tighten to the recommended torque specification. See bolt torque specifications on
Figure 4F Exploded View of Peak Ring Attach Clips
After You Finish
Repeat this process for the remaining roof rafters.
Ref #
Part #
Description
A
CRP-7346
Roof Rafter
B
CRP-6092
Peak Ring Attach Clip
C
S-7487
3/8" x 1" Flange Bolt
D
S-9426
3/8" Flange Nut
E
Roof Panel Hole
