44
RECIPE PRE-ALARM
000000 lb
KEY-IN PRE-ALARM VALUE
[ENTER]=Accept Value [CLR]=Delete
Figure 28: Recipe Pre-Alarm
NOTE:
If the
PRE-ALARM METHOD
parameter in the scale setup is set to
“COMMON PRE-ALARM”, then the indicator disregards the Recipe
Pre-alarm weight and instead uses the
PRE-ALARM WEIGHT
specified in the scale setup for all recipes. See Table 6 for more details on
the Pre Alarm setup.
4.2.2 Weight
Entry
Method
The weight entry method is selected after entering the recipe pre-alarm
when adding new recipes (see section 4.2). The weight entry method
cannot be changed when editing a recipe. There are 3 weight entry
methods used for loading ingredients:
WEIGHT/LOAD
Target weight entered as the actual ingredient weight to be
loaded.
WEIGHT/ANIMAL
Target weight entered as the amount of each ingredient to be
feed to a single animal.
PERCENT/LOAD
Target percentage of each ingredient. Target weight will be
calculated as a percentage of the total load amount.
Press
[YES]
to accept the displayed weight entry method and proceed
with ingredient selection as described in the following section.
Press
[NO]
to scroll to the next weight entry method.
