13
Section 3: Configuration
3.1 Password
A password must be entered for full access to all setup parameters. The
password routine may be bypassed by pressing
[ENTER]
without
entering a password. Bypassing the password allows access to only
Quick Menu items listed in section 3.2.
3.1.1 Entering a password
An asterisk (
*
) is displayed in place of each password keypress. When
four digits have been pressed, the entry is automatically accepted and
compared to the stored password. The default user password is "
0000
".
To enter a password:
1.
From the weigh mode press
[HELP]
, then
[ENTER/YES]
to
display the password screen (see Figure 9).
2.
Key in the 4-digit password.
KEY-IN PASSWORD
_ _ _ _
PASSWORD REQUIRED FOR FULL ACCESS
[ENTER]= Limited Access [HELP] =Exit
Figure 9: Key - In Password Screen
3.1.2 Changing
the
Default Password
To change the existing password:
1.
From the weigh mode press
[HELP]
, then
[ENTER/YES]
to
display the password screen (see Figure 9).
2.
Enter
9999
as the password. The display will prompt
Enter
OLD Password
.
3.
Key in the existing password. If the indicator is new and a new
password has not yet been set, the default password will be
"
0000
".
4.
Next, enter the new password at the
Enter NEW Password
.
5.
Enter the new password a second time at the ReEnter NEW
Password prompt to verify the password entry.
