1.BUTTONS “CH“
Press to adjust services down and up.
2.BUTTONS “VOL“
Press to increase or decrease the volume.
3.STANDBY LED(RED)
Indicates that the STB is in standby mode.
OPERATING LED(GREEN)
Indicates that the STB is operating
4.Four-valued indicator
5.BUTTON MENU
Press to display the Main Menu on the screen or return to the screen from a sub menu
screen.
6.BUTTON ESC
Press to return to the previous menu and screen.
7.BUTTON OK
This button is used to select the item on the menus.
8.BUTTON POWER
Switches on and switches off the STB. Moves STB from Standby to Operating mode and back.
1.LNB IN
Use to connect an antenna.
2.LNB OUT
Use when connecting to another STB.
3.RS-232C
Use when connecting to your PC.
4.TV SCART
For the audio/video input on the TV.
5.VCR SCART
For the VCR.
6.AUDIO/VIDEO OUTPUT
Audio/video signal for HI-FI system and TV.
7.DIGITAL AUDIO
Output for connection to a digital amplifier.
8.RF OUTPUT
Use to connect a RF signal from your STB to RF(ANT) input jack on your TV.
9.RF INPUT
Use to connect a general Aerial Antenna and CABLE jacks to a RF input jack on the STB.
10.S-VIDEO
Output for connection with TV.
FRONT PANEL AND REAR PANEL OF THE SET-TOP BOX
5
1
2
8
7
6
5
4
3
1
2
8
7
6
5
4
3
10
9
