ENGLISH
23
Remove blockages
1
Unplug the power cord plug from the wall
socket.
2
Check the following parts for blockages:
– The plug-in contact of the flexible hose .
– The plug-in contact between
the flexible hose and the guide
handle .
– – The plug-in contact between the telescopic
vacuum tube and the floor brush.
B
B
Note
7
If you did not find any blockages it may be at
the end of the guide handle in the connector.
Pull off the holder for the tools and use a flat
screwdriver or similar tool to release the hooks.
Then dismantle the parts apart and remove the
dirt. Reassemble the parts again so that the
hooks latch into place.
CLEANING AND CARE
________________________________________
A
B
C
02_VCC_7650_en 18.09.2007 10:57 Uhr Seite 23
