ENGLISH
25
4
Remove the foam rubber filter
from the underside of the filter cover.
5
Clean the foam rubber filter in hot soapy
water, rinse well and leave to air dry.
6
Carefully replace all the parts.
Note
7
The filter in the dust container should be
changed every six months or sooner if neces-
sary.
The exhaust air filter should be replaced every
six to nine months or sooner if necessary.
Frequent washing results in filter wear and tear.
Correcting faults yourself
The appliance is equipped with a fuse disconnec-
tor, which automatically switches off the motor if it
overheats. In this case, complete the following
steps:
1
Switch off the appliance and disconnect the
mains plug from the wall socket.
2
Look for the cause of the overheating (blocked
hoses/tubes, dirty filter, etc.).
3
Remove any blockages, if necessary change
the dust bag or clean the filter.
4
Leave the motor to cool for approx 30 to 40
minutes.
5
Then reconnect the appliance and switch on. It
should now work.
6
If the appliance cannot be switched on, wait
for 20 minutes and then try again.
7
If the appliance still won't work, please contact
your dealer or the GRUNDIG service centre.
CLEANING AND CARE
________________________________________
02_VCC_7650_en 18.09.2007 10:58 Uhr Seite 25
