Grundig Toronto 55 CLE 6545 AL, User Instruction

Page: 91 / 95

ENGLISH 90­
Displaying­signal­information
(only for digital television channels)
1 Open the menu with » MENU «.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Source Setup« with
»
>
« or »
<
« and press »
OK
« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5 Select the line »Signal Information« with
»
V
« or »
Λ
« and press » OK « to confirm.
– »Signal Information« menu is displayed.
Notes:
7
Signal information changes depending on
the current source.
7
Signal information is shown on the left of the
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the signal
level display.
6
Press »
EXIT
« to close the menu.
SPECIAL­SETTINGS
­----------------------------------------------------------------------------------------
Deactivate­and­activate­HbbTV
This option allows turning off Hbb TV feature,
thus warnings shall not be displayed on chan-
nels with Hbb TV feature.
1 Open the menu with » MENU «.
2
Activate the menu item »Settings« with
»
OK
«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5 Select the line »Hbb TV« with »
V
« or »
Λ
«.
6
Select the option (»Off«) with»
<
« or »
>
«.
Note:
7
To activate HbbTV again, select in step.
6
the option »On«.
7 Press » EXIT « to end the setting.
Deactivate­and­activate­digital­
teletext
If you deactivate digital video text, only normal
video text can be selected, however the other
functions of the interactive service HbbTV are still
available.
1
Open the menu with »
MENU
«.
2 Activate the menu item »Settings« with
» OK «.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
4 Select the line »Advanced« with »
V
« or
»
Λ
« and press » OK « to confirm.
5
Select the line »Digital Teletext« with »
V
« or
»
Λ
«.
6 Select the option (»Off«) with»
<
« or »
>
«.
Note:
7
To reactivate digital teletext, select »On« in
step 6 .
7
Press »
EXIT
« to end the setting.