Grundig Toronto 55 CLE 6545 AL, User Instruction

Page: 88 / 95

87­
ENGLISH
SPECIAL­SETTINGS
­----------------------------------------------------------------------------------------
Automatic­service­update­
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
This updating affects all types of reception - ter-
restrial, cable and satellite.
1 Open the menu with » MENU «.
2 Activate the menu item »Settings« with
» OK «.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced Settings« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
5 Select the line »Automatic Service Update«
with »
V
« or »
Λ
« and select the automatic
update with »
<
« or »
>
« (»On«).
6 Press » EXIT « to end the setting.
Tuning­analogue­television­­
channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channel can be set directly or
using the search.
Setting­all­analogue­television­
channels
The analogue television stations are listed in the
channel list after the digital television stations.
Note:
7
Plug the rooftop antenna cable (for ana-
logue television stations) into the »
ANT­IN
«
socket on the television.
1 Open the menu with » MENU «.
2 Activate the menu item »Settings« with
» OK «.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press »
OK
« to con-
firm.
5 Select the option »Air« or »Cable« with »
<
«
or »
>
« and confirm the source you are re-
ceiving analog broadcast from by pressing
» OK «.
6­ Select the option »Digital« with »
<
« or »
>
«
and press »OK« to remove the small tick.
7
Press »

« (red) to start searching.
Notes:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
– All channel and favourites lists for the
analogue channels will be deleted and
compiled new.
– The »Analog Searching« menu appears,
and the scan for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
– The search is complete as soon as the
»Search is completed!« appears.