Grundig Toronto 55 CLE 6545 AL, User Instruction

Page: 74 / 95

73­
ENGLISH
USING­EXTERNAL­DEVICES
­---------------------------------------------------------------
Device­Control
You can determine how the remote control of
your television will control the external device.
1
Press » « and use »
<
« or »
>
« to select
either one from »HDMI1« to »HDMI4« and
press » OK « to confirm.
2
Open the menu with »
MENU
«.
3 Activate the menu item »Settings« with
» OK «.
4 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
Source Setup
Sound Settings Parental Guidance
Back Change Area
Device GRUNDIG
Remote Behavior None
Put device into standby
OK
5
Select the line »Remote Behavior« with »
V
«
or »
Λ
«.
6 Select control type (»Pass-Through«, »Deck«
or »Zap«) with »
<
« or »
>
«.
Notes:
7
»Pass-Through« is included in the menu as an
option that can be selected in every device
type. »Deck Control« and »Tuner Control«
options change depending on the external
device connected.
7
Apply trial and error method to determine
the functions of the remote control buttons for
the selected control type.
7
Refer to the user manual of the DIGILINK
compatible device for its functions.
7 Press » EXIT « to end the setting.
Switching­the­device­to­standby
This option switches the connected external de-
vice to standby.
1
Press » « and use »
<
« or »
>
« to select
either one from »HDMI1« to »HDMI4« and
press » OK « to confirm.
2
Open the menu with »
MENU
«.
3 Activate the menu item »Settings« with
» OK «.
4 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
– »Source Setup« menu is displayed.
5
Select the line »Put device into standby«
with »
V
« or »
Λ
« and press »
OK
« to con-
firm.
– The connected external device is switched
off.