STE 1000
Allgemeiner T
eil / Gener
al Section
GR
UNDIG
Ser
vice
1 - 21
Operation
❒
Specifying custom audio modes
Your receiver is already preprogrammed with a
number of satellite channels (see channel list
attached). This preprogramming also comprises 13
fixed audio modes available (see list in chapter
”Choosing alternative sound channels”). There are
also ten custom audio modes which you can set up
yourself.
Press the
.
key on the handset twice.
– This displays the MAIN MENU.
Press the numeric key
4
and then the numeric
key
3
.
– This displays the current settings of the ten
CUSTOM AUDIO modes.
You can move between the ten modes using the
c
and
x
keys.
Select the corresponding data with the
]
and
|
keys.
Select the audio frequency for the left and right
channel: alter the value (between 5.50 and 10.00
MHz) with the
c
and
x
keys or enter the value
directly with the numeric keys.
Select the required deemphasis with the
c
and
x
keys: 50
µ
s, J17 or GNRS.
If GNRS is used for the current channel position,
the receiver’s display indicates NRS.
Use the
c
and
x
keys to select the bandwidth
giving the best sound quality (between 1 and 4).
Press
O
to store the setting.
Press the
.
key twice to terminate the setting.
Abbreviations:
50 µs:
Deemphasis
J17:
Deemphasis
GNRS: Grundig Noise Reduction System.
6
9
8
7
6
6
5
4
3
2
1
6
Controlling access
You can protect your receiver against unauthorized
use.
This is possible with all TV channels and a number
of settings. These access cotrols rely on a personal
identification number, or PIN.
❒
Setting up your own PIN
When it leaves the factory, the receiver is program-
med with a default PIN code (see page 24).
You can alter this code number to whatever you
may find easy to remember.
Press the
.
key on the handset twice.
– This displays the MAIN MENU.
Press the numeric key
2
.
– This displays the ACCESS CONTROL menu.
Press the numeric key
1
to edit the PIN.
Enter the current PIN (the PIN cannot be set with-
out knowing the old number or it could be set by
anyone).
Each dash represents one digit of the PIN and it
changes to fullstop as you enter that digit.
Assuming you entered the PIN correctly, the screen
prompts you now for the new PIN (NEW PIN) then
asks you to enter the PIN a seconds time for confir-
mation (CONFIRM PIN).
If you enter two different code numbers, the current
PIN is maintained.
w
!
If you enter the current PIN incorrectly, the screen
displays INVALID PIN and returns to the ACCESS
CONTROL menu. Press the
.
key twice to exit the
menu.
6
5
4
3
2
1
MAIN MENU
1
TIMER
2
ACCESS CONTROL
3
CHANNEL SETUP
4
INSTALL
5
LANGUAGE
I
TERMINATE
ACCESS CONTROL
1
EDIT PIN
2
RESET PIN
3
MENU ACCESS
I
TERMINATE
EDIT PIN
NEW PIN - - -
CONFIRM PIN - - -
INSTALL MENU
1
LNB INSTALL
2
SET CLOCK
3
CUSTOM AUDIO
4
VIDEO
I
TERMINATE
CUSTOM AUDIO
LEFT
7.02 MHZ
RIGHT
7.20 MHZ
DEEMPH.
50 US
BANDWIDTH
1
OK
STORE
MAIN MENU
1
TIMER
2
ACCESS CONTROL
3
CHANNEL SETUP
4
INSTALL
5
LANGUAGE
I
TERMINATE
Operation
❒
Resetting the PIN
If you forget your own PIN code, you can reset the
PIN to the factory default number which can be
found on page 24.
Press the
.
key on the handset twice.
– This displays the MAIN MENU.
Press the numeric key
2
.
– This displays the ACCESS CONTROL menu.
Press the key
2
to display the RESET PIN screen.
Use the
c
or
x
key to change RESET PIN NO to
RESET PIN YES then press
O
.
4
3
2
1
❒
Using the PIN
Some channels show programmes you may not
wish other members of your family to watch (say,
child endangering programmes).
You can lock or unlock any channel on your
receiver.
If you select a channel that has been locked, the
receiver blanks the screen and the display shows
the symbol
. After several seconds, the dis-
played channel name changes to
LOCKED
, the
symbol
will flash and you are prompted on the
picture screen to enter your PIN.
Now you can
– use the
]
or
|
key to select another channel
position,
or
– enter your PIN to reveal the locked channel.
If the channel position is revealed, the receiver’s
display shows
FREE
and the TV picture appears on
the screen.
The channel position is revealed until you switch to
another channel position and then back again.
Entering an incorrect PIN will produce the message
INVALID KEY on the screen. Select another channel
position in this case.
6
MAIN MENU
1
TIMER
2
ACCESS CONTROL
3
CHANNEL SETUP
4
INSTALL
5
LANGUAGE
I
TERMINATE
ACCESS CONTROL
1
EDIT PIN
2
RESET PIN
3
MENU ACCESS
I
TERMINATE
RESET PIN
NO
OK
STORE
