Grundig RR 700 CD, User Manual

Page: 14 / 18

5. Cassette
Recording from the Built-In CD Player
1. Set the function switch to CASS
Ǽ
.
2. Insert a cassette which has not been protected against
erasure (see the section “Erasing a Recording”).
3. If necessary, wind the tape to the position where you
wish to begin recording.
4. Set the function switch to CD.
5. Insert a CD and select the desired starting track or pro-
gramme track sequence (see the section “Programmed
Playback”).
6. Press the PLAY/PAUSE button on the CD player twice
(pause mode).
7. Press the OTR
●
button to begin recording - the PLAY
ı
button is automatically pressed in with it ( O ne- T ouch
R ecording).
If the CD player is paused, it does not need to be started
separately. It starts automatically (Synchro-Start).
8. To interrupt recording, press the STOP/EJECT
■
ə
but-
ton.
The CD player switches to pause.
Press the OTR
●
to resume recording.
9. When the tape reaches the end, the cassette deck and the
CD player stop automatically and the CD player switches
to pause.
10. To switch off the unit, set the function switch to CASS
Ǽ
.
Note
The volume you set does not have an influence on the recor-
ding.
The recording level is automatically adjusted.
Recording from the Built-In Radio Component
1. Tune to a station as described in the section “Radio Opera-
tion”.
You can record and listen to any station simultaneously.
While recording, you can adjust the sound to suit your own
personal taste. This does not have amy effect on the recor-
ding.
2. Insert a cassette, making sure that it is not protected
against erasure (see the section “Erasing a Recording”).
3. Wind the tape to the position where you wish to begin
recording.
4. Press the PAUSE II button.
5. Press the OTR
●
button and the PLAY
ı
button is auto-
matically pressed in with it. ( O ne- T ouch R ecording).
6. Release the PAUSE II button by pressing it again. This
starts the recording.
7. To briefly interrupt recording, press the PAUSE II button.
Press this button again to resume recording (button in =
pause, button out = start).
8. Press the STOP/EJECT
■
ə
button to terminate recor-
ding.
9. Set the function switch to CASS
Ǽ
to switch off the unit.
Recording with an External Microphone
Connect an external microphone to the
s
socket on the top of
the unit.
Proceed as described for the radio component.
ķ
13