ENGLISH
5
INSTALLATION, CONNECTING
____________________
Installing modulators into the Headend station
Caution:
Before fitting or replacing a cassette, it is absolutely necessary
to disconnect the mains plug of the headend station from the
wall outlet.
Note:
The "Retrofit coaxial socket " can be ordered from your local SAT/BK
service office
or
from the GRUNDIG AG in Nürnberg/Germany.
– Telephone: ++49(0)911/703 87 06
– Telefax :
++49(0)911/703 92 10
Follow these steps:
1
Undo the fixing screws of the mounting frame, then fit the cassette into a free
slot and refit the fixing screws.
2
Plug the RF input cable into the RF input socket(s)
SAT INPUT A
and/or
SAT INPUT B
(see Figure).
3
If the modulator has been equipped with one or two decoder interfaces:
connect external units via the respective connecting cables to the 15-pin
Sub-Min-D socket(s)
DECODER A
and/or
DECODER B
(see Figure).
4
Reconnect the Headend station to the mains supply.
– The installed modulator is now connected with all necessary supply voltages
and data lines and ready for use.
DECODER B
SAT INPUT A
DECODER A
SAT INPUT B ( retrofitting)