14
Feeding the picture/sound signals of external equip-
ment permanently into the signal path
1
Fit the decoder module and the required flat ribbon cable.
In addition you must
cut the three wire bridges BR 1068 (Audio, right), BR 1093 (Audio, left)
and BR 1094 (Video), for channel
LINE A
and
cut the three wire bridges BR 2068 (Audio, right), BR 2093 (Audio, left)
and BR 2094 (Video), for channel
LINE B
(see Figure below).
Remote switching
It is possible to remotely switch between the picture/sound signals of the SAT
programmes and the external equipment.
Switching can be effected, for example, manually or via a timer or via a
dimming switch.
1
Connect the switch inside the 15-pin plug of the enclosed adapter cable to
the pin 9 (12 V/10 mA switching voltage) and to the pin 3 (see Figure).
2
Fit the decoder module and the required flat ribbon cable.
In addition you must
cut the four wire bridges BR 1068 (Audio, right), BR 1093 (Audio, left),
BR 1094 (Video), and BR 1095 “Dec – off ”, for channel
LINE A
and
cut the four wire bridges BR 2068 (Audio, right), BR 2093 (Audio, left),
BR 2094 (Video), and BR 2095 “Dec – off ”, for channel
LINE B
(see Figure
below).
EURO-AV
front of plug
socket
BR01093
BR01068
BR02068
BR02093
BR02094
BR02095
BR01094
BR01095
BR 1095
BR 1094
BR 1068
BR 1093
BR 2068
BR 2093
BR 2094
BR 2095
ACCESSORIES
___________________________________________________________________________
