ENGLISH 23
OPERATION_________________________
7
Place the appliance on a solid,
flat, heat resistant surface. Do not
place the appliance on any soft
or uneven surfaces such as car-
pets, rugs or bedding and never
cover.
Note
7
Release the plate lock
I
if neces-
sary.
1
Plug the power cord
E
into the
wall socket.
2
Switch the appliance on by press-
ing the On/Off button
H
for 2
seconds.
– The LCD
C
lights up in blue.
3
Press the heat setting buttons »+«
F
or »–«
G
to set the tempera-
ture. Heat setting button »–« to
reduce the temperature in 10 °C
increments, »+« to increase the
temperature in 10 °C increments.
Notes
7
Select the lowest temperature set-
ting the first time you use it. There
are 9 temperature levels avail-
able (140 °C = min., 220 °C = max.).
7
When the appliance reaches
the set temperature, a signal
sounds meaning that is is ready
to use.
7
When set accordingly, the
temperature level reaches the
maximum temperature of
220 °C after 60 seconds.
Hold the appliance in your
hand while it heats up.
4
Comb or brush out a section
of your hair about 3 cm wide,
starting at the neck.
5
Place the section of hair be-
tween the plates
A
as close to
the hair line as you can, and
then close them.
Caution
7
Do not touch the plates as they
are very hot.
6
Hold the appliance in position
until the hair is heated.
– This takes a few seconds at the
most.
7
Guide the plates in a careful,
smooth movement away from the
head to the end of the section of
hair. Avoid making kinks in it.
Notes
7
Repeat the procedure section by
section.
7
If you have thick hair, you might
have to repeat this procedure on
the same section several times.
All manuals and user guides at all-guides.com
