Grundig GV 600 SV, User Manual, Page: 16 / 40

The Cassette
ķ
15
❒
Inserting a cassette
Push the cassette with the window facing upwards
into the cassette compartment until it is automati-
cally pulled in.
– The display » CASS. IN « is show on the recorder.
❒
Cassette tape length/playing time
automatic recognition
After having inserted the cassette the recorder will
measure the playing time (display: »
ATTS
«), indica-
te the total playing time in hours (e.g. E180 for a
three-hour cassette) if a standard hours cassette is
used (E 60, E120, E180, E240) and the elapsed play-
ing time in hours and minutes.
In the case of all other cassettes – including 5-hour
cassettes – the playing time must be entered
manually.
❒
Entering the playing time manually
Start playback using the
T
/
y
button, Then
press the
h
button and the
G
button on the
remote control.
– The » CASSETTE SELECTION « table appears.
Select cassette playing time using the
DC F E
buttons and confirm using the
G
button.
❒
Indication of the total playing time
Three display options are available:
Elapsed playing time in hours and minutes,
display »
U I : 30
«;
Remaining playing time in hours and minutes,
display »
L I : 35
«;
Tape length in hours, minutes, and seconds,
display »
0:00:00
«.
Select desired display using the
¢
COUNTER
button.
If the playing time cannot be determined, the recor-
ding automatically switches to the five-digit tape
length display.
Ǻ
2
1
2
EC30 E105 E210
EC45 E120 E225
EC60 E135 E240
E30 E150 E260
E45 E165 E280
E60 E180 E300
E75 E195
E90 E200
– – – – – – – – – – – – – – – – – – –
ļ Ļ ĵ Ł
OK i
1
Ǽ
Ļ
ļ
1
The tape length display is automatically set to
»
0:00:00
« when a cassette is inserted.
It can also be reset manually to »
0:00:00
« using
the ¢
RESET
button.
❒
Ejecting a cassette
Press the
N
/
w
button; the cassette is ejected.
❒
Protecting recordings against accidental
erasure
Whenever a recording is made on a cassette, any
recording already on the tape will be erased auto-
matically. To avoid this, it is possible to protect
your cassettes against accidental erasure/re-recor-
ding.
To do this, simply break off the tab on the cassette.
If you wish to use the cassette for recording again,
cover the opening with adhesive tape.
Function displays
(OSD – ON SCREEN DISPLAY)
The recorder provides information on the selected
function and the playing time of the cassette.
1. On the display of the recorder.
2. On the screen of the TV set.
It is possible to adjust the duration of the screen
displays:
– permanent display,
– display for a short period,
– no display.
This setting can be found in the chapter “Special
functions”, setting the OSD display “function” on
page 32.
It is possible to alter the language of the display.
This setting can be found in the chapter “Special
functions, selecting the language for the user
guide” on page 35.
1
Ǻ