Grundig GRB 3000 BT, User Manual

Page: 26 / 70

ENGLISH
26­
CD­MODE­____________________________________
Random­play
1­
During playback, press MODE/MONO/ST. button
three time until the display showing RND. The tracks of
the disc will be played in random order.
2­
To terminate the function, press this button once.
Creating­a­track­memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting­and­storing­tracks
1 Press » PROG/MEM/STOP « to call up the function.
in stop mode.
2 Select the track by pressing » DOWN­ « or » UP­
button
3 Press » PROG/MEM/STOP « button to save the
track into the program list.
4
To store more tracks, repeat steps
2
to
3
.
Playing­back­a­track­memory
1 Start the track memory by pressing » PLAY/
PAUSE «.
– Playback begins with the first programmed file or
track.
2 Press » PROG/MEM/STOP­ . « button to end
playback.
3
To play the track memory again, press
»
PROG/MEM/STOP
« button once, then press
»
PLAY/PAUSE
«.
Changing­the­track­selection
1 In stop mode, keep briefly pressing » PROG/
MEM/STOP « button until program number you
want to replace appears in the display.
2
Select the number of the new track by pressing
»
DOWN­
« or »
UP­
«.
3
Press »
PROG/MEM/STOP
« to save the new track.
Adding­tracks
1 In stop mode, press » PROG/MEM/STOP « until
the last program number is shown in the display.
2
Select the number of the new track by pressing
»
DOWN­
« or »
UP­
«.button
3 Press » PROG/MEM/STOP « to save the new track.
Deleting­the­track­memory
The device must be in the stop position.
1 Press » OPEN/CLOSE « to open the CD compart-
ment
or
and hold the » PROG/MEM/STOP « button while
programming.