Grundig GRA-D1104B, Owner'S Manual

Page: 67 / 136

1. From <SYSTEM SETUP> - <EVENT>, select <SYSTEM EVENT>.
2. Use the [
▲▼ ◀▶
] buttons on the remote control or use the mouse to specify the reaction to each event.
3. To apply the change, click on <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The
confirmation message will appear and you will return to the previous menu.
Disk :
> START DISK OVERWRITE : If you set the disk write mode to <OVERWRITE>, this event occurs when the disk is
full and the overwriting begins accordingly.
> DISK FULL EVENT : If you set the disk write mode to <ONCE>, this event occurs when the disk is full (100%).
> DISK SPACE EXHAUSTED : Event that is triggered if the disk is almost full. Click to specify the threshold
percentage of usage to trigger the event.
> S.M.A.R.T. EVENT : Occurs if the disk causes the S.M.A.R.T. error.
> NO DISK : Occurs if no disk is recognised after booting due to a disk failure or cable problem.
NOTE: To detect a disk error, it is recommended not to change the settings of S.M.A.R.T. EVENT, NO DISK EVENT
and BUZZER OUT.
65 English