Grundig GRA-D1104B, Owner'S Manual

Page: 11 / 136

4.3. Basic Layout
NOTE: Since the cable quality may affect directly the video quality depending on the distance between the camera
and DVR, it is recommended to consult an authorised installer when installing the DVR.
Basic Layout:
4.4. Connecting To An External Device
4.4.1. Connecting the Monitor
This product supports 1080p 60 Hz HDMI monitors and regular monitors that support DVI and VGA inputs. Use
the switch on the product’s rear side to set it to PAL or NTSC signal. Connect an HDMI cable to the port on the
product’s rear bottom side, or connect an HDMI-to-DVI converter cable to connect a DVI monitor. Or, use a VGA
cable to connect the product with a VGA monitor.
Once the product is set to NTSC or PAL output, connect only cameras of the corresponding video
standard for proper operations. Setting the product to NTSC or PAL determines the available display output
modes, too.
The monitor’s displaying operates at 50Hz if the product has been set to PAL output and the connected monitor
supports both 50Hz and 60 Hz inputs. At the NTSC setting, it works at 60 Hz.
NOTE: Make sure to connect the product to a monitor that supports 1920x1080 at 60Hz (HDMI, DVI, VGA).
4.4.2. Power Connection
Guidelines for this connection:
Plug the provided DC 12V adaptor in the rear power port of the DVR.
When done, attach the Adapter cable retainer clip to the rear panel and insert the cable in.
9 English