DISHWASHER / USER INSTRUCTIONS
13 / 48 EN
Preparation
a
b
c
d
e
f
Remove the test
strip from the
.packet
Turn on the tap and
let the water run for
.about a minute
Hold the test strip in
the water for about
.a second
Remove the test
strip from the water
.and shake it
.Wait for 1 minute The test strip shows
you the hardness
.level
Second 1
Minute 1
.min 1
After determining hardness level of the supply water:
1. Press On/Off key to turn on the machine.
2. Enter the Settings Menu by pressing the Function button d for 3 seconds.
3. By using function button b, adjust water hardness level according to the hardness of the
supply water.
See “Water hardness level adjustment table” for correct setting.
4. Exit the Settings Menu by pressing the function button d for 3 seconds.
Water Hardness Level Adjustment Table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level
0-5
0-4
0-8
Press the function button b to set the
.water hardness level to position 1
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
Press the function button b to set the
.water hardness level to position 2
3rd Level
16-19
13-15
23-27
Press the function button b to set the
.water hardness level to position 3
4th Level
20-24
16-19
28-34
Press the function button b to set the
.water hardness level to position 4
5th Level
25-62
20-50
35-90
Press the function button b to set the
.water hardness level to position 5
Water Hardness: 1
Water Hardness: 2
Water Hardness: 3
Water Hardness: 4
Water Hardness: 5
If the hardness level of the supply water is above 90°dF or if you are using well water, then it
is recommended to use water purification devices and special filters.
Since your machine is equipped with an Automatic Water Hardness Detection System,
appropriate salt should be put in the dishwasher when “Salt indicator” illuminates.
If salt is not put in the machine, the Automatic Water Hardness Detection System will not work
properly.
