30
DISHWASHER / USER INSTRUCTIONS
/48 EN
Operating the product
C
At the end of the programme or
if no programme is started, in
order to provide energy saving
the machine is automatically
switched off after a certain
amount of time
To deactivate the Child Lock:
1. Press and hold the Child (Key) Lock key
for 3 seconds.
2. When the Child Lock key is pressed
and hold for a long time, "Child Lock:
3", "Child Lock: 2", "Child Lock: 1" and
"Child Lock: Off" appear on the Display
Information Line.
Canceling a programme
1. Press Start / Pause / Cancel key for 3
seconds to cancel the programme.
2. When the Start / Pause / Cancel key is
pressed and hold, "Cancel 3", "Cancel
2", "Cancel 1" appear on the Display
Information line.
3. When the canceling process starts,
Display Information line shows
"Canceling..." and once the process
is completed, "Cancelled" message is
given on the Display Information line.
For a couple of minutes the machine
will perform the necessary operations
required to cancel the programme.
C
You can select and operate a
new programme following the
cancellation of the programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Changing the auxiliary function
To change the auxiliary functions after starting
the programme, you should cancel the
programme in the first place. Then, you can
select and start new functions.
Machine settings
You can use "Settings Menu" to change the
"Water Hardness", "Active Self-cleaning
Filter", "Inner Illumination", "Doormatic",
"Volume", "Brightness" and "Language"
settings you are going to use in your machine,
or to restore the factory settings.
C
"Active Self-cleaning Filter",
"Inner Illumination" or
"Doormatic" features may not
be available in your machine
depending on its model.
To enter the Settings menu:
1. Press On / Off key to turn on your
machine.
2. Press Settings Menu key for 3 seconds to
enter the "Settings Menu".
3. "Settings 3", "Settings 2", "Settings 1"
message will be displayed on the Display
Information line and 3 seconds later you
will be in the Settings Menu.
4. After entering into the "Settings menu",
press function key (c) to switch to the next
main menu, and press function key (a) to
go back to the previous main menu.
5. Use function key (b) to make changes
in the menus. Changes made are stored
automatically.
C
You will be asked for your
approval when changes are
made in "Language" or " Factory
Settings?" menus.
