DISHWASHER / USER INSTRUCTIONS
33 / 48 EN
Operating the product
Factory Settings?
Proceed as indicated below to cancel all
your personal settings and restore the factory
settings:
1 Press the function key (b) key. Following
message will be displayed upon
pressing the key.
2. Press funciton key (b) key to store the
changes or press function key (a) to exit
the menu without saving.
When factory settings are restored, settings
will have the following values:
Language = Deutsch
Brightness = 2
* Doormatic = On
* Active self-cleaning filter
* Inner Illumination = On
Volume = High
Water Hardness = 1
* These menus may not be available
depending on the model of your machine.
Warning messages
Your machine will give you some important
feedbacks while it is running.
Salt indicator (
)
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever salt warning indicator appears on
the display of your machine.
C
Salt indicator warning will
go off automatically once the
programme is started.
Rinse Aid indicator ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.
C
Rinse aid warning will go
off automatically once the
programme is started.
Water Cut-off indicator (
)
Water Cut-off warning indicator will light
when the machine cannot ta ke in water and
"No water!" warning is displayed on the
Display Information line. When the water is
supplied again, warning light will be turned
off automatically.
A
Make sure that the water is
not cut-off and the tap is not
closed when the Water Cut-off
warning light is illuminated. Call
Authorised Service Agent if
water is not cut-off and the tap is
open.
Call service
Please call the service when you see this
warning on the Display Information line. It
is possible that your machine has taken in
plenty of water due to various reasons.
