DISHWASHER / USER INSTRUCTIONS
31 / 48 EN
Operating the product
6. Press either one of function key (c) or
function key (a) to store the changes
made in the "Language" setting or in
the " Factory Settings?" menu. Following
message will be displayed upon
pressing the key.
7. Press function key (b) to save the
change. If you press function key (a)
without making any changes in the
menu, you will switch to the next setting
menu and the changes made will not be
saved.
8. To exit the "Settings Menu", press the
function key (d) for 3 seconds.
9. "Exit settings 3", "Exit settings 2", "Exit
settings 1" will be displayed on the
Display Information line and 3 seconds
later you will be out of the Settings
Menu.
C
Time Delay and Start / Pause
/ Cancel keys do not have any
function in the "Settings Menu".
Pressing these keys has no effect.
Adjusting the Water Hardness
You need to adjust the "Water Hardness"
level to one of the following values that suits
the properties of your supply system.
C
Adjust the new water hardness
level according to the Water
hardness level instruction
supplied with your machine.
1. Lime free
2. Very slightly limy
3. A little limy
4. Mediocre limy
5. Limy
6. Very much limy
Automatic Detergent Detection
Feature
The product has a feature to automatically
detect the type of the detergent and adjust
the washing programme and drying
system to the best performance. If special
tablet detergent is used, the programme
duration can be extended by 20 minutes in
order to optimize the washing and drying
performance. (This feature may not be
available depending on the model you have
purchased.)
Active self-cleaning filter
When you enable this function, your micro
filter will be cleaned by a special system at
the end of washing and it is made ready
for use for the next usage of the machine.
This cleaning process increases the cleaning
period of the micro filter from 2 weeks
to 3 months and thus boosts the washing
performance. Employing this function in
every cycle is recommended in order to get
the most out of it.
There are two options, namely "On" and
"Off" for this function. It is set to "Off" at
the factory. You have to change this from
"Off" to "On" position when you want to
use the function. (This feature may not be
available depending on the model you have
purchased.)
Inner Illumination
When you enable this function, internal
illumination lamp will light every time you
open the door of your machine. There are
two options, namely "On" and "Off" for this
