Grundig GIEH 824470 X, User Instructions

Page: 65 / 276

65
ENG
DE
DA
NO
SV
FI
PL
CS
SK
Operation
- turn on the aspiration hob by
pressing ;
- with the aspiration motor and
cooking zones off, press and hold
;
- “ ” turns on, then off to indi-
cate successful activation.
Deactivation of activated carbon
odour filter saturation indicator
repeat the activation steps de-
scribed above “ ” flashes, then
turns off to indicate successful de-
activation.
Automatic operation (Hob2Hood)
The hood will turn on at the most
suitable speed, adapting the ex-
traction capacity to the cooking lev-
el used in the cooking zone.
Once the hob is turned off, the hood
adapts its aspiration speed, gradu-
ally decreasing it, so as to eliminate
residual vapours and odours
To activate this function:
Briefly press
(7) , the LED “ ”
(18) will light up to indicate that the
hood is working in this mode.
The suction surface is designed
to be used in combination with a
Window sensor KIT (not provided
by the manufacturer) When install-
ing the Windows sensor KIT (only
in the case of use of the surface in
SUCTION mode), the suction will
stop operating every time when
the KIT which with the surface is
equipped detects that the win-
dow is closed in the room where
it is installed. It is recommended
the purchase of the FDS KIT - 100
Elektrotechnik Schabus, avail-
able at authorised Elektrotechnik
Schabus centres or directly on the
Internet site
www.elektrotechnik-schabus.de.
- The electrical connection of the
suction surface KIT must be car-
ried out by qualified and specialised
technical personnel.
- The manufacturer of the suction
surface declines all responsibility
for any inconvenience, damage or
fire caused by defects and/or prob-
lems of malfunctioning and/or in-
correct installation of the KIT.