20
Connecting the mains cable
1
Plug the mains cable supplied into the »
110-240 V~
« socket
on the back of the DVD recorder.
2
Plug the mains cable into the wall socket.
Caution:
The only way to disconnect the DVD recorder from the mains is
to pull the plug.
Note:
Do not connect any other equipment while the device is swit-
ched on. Switch off the other equipment as well before connec-
ting it.
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Inserting batteries in the remote control
1
To open the battery compartment, press the catch and remove
the lid.
2
When inserting the batteries (Micro type, e.g. R06 or AA,
2 x 1.5 V), observe the polarity marked on the battery compart-
ment.
3
Close the battery compartment.
Note:
If the DVD recorder no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage result-
ing from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metals, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
CONNECTION AND PREPARATION
__
110-240 V
~
50/60 Hz 35 W
