If the product starts to smell or smoke comes out of the device,
immediately stop using the product and disconnect it from the
power supply to prevent fire or electric shocks. Then contact
your dealer or the nearest service center.
If the product does not work correctly, contact your dealer or
nearest service center. Never open, disassemble or alter the
product yourself. GRUNDIG cannot accept any liability or
responsibility for problems caused by attempted and
unauthorized repair and maintenance.
2. Installation Instructions
It is necessary to fix the device firmly if the product is installed on a
wall or ceiling.
Do not install the product near radiation sources. Do not install
the product near heat sources, like radiators or other equipment
that produces some heat.
Do not install the product in very cold or hot temperatures
(please refer to the working temperature specified in the
specification sheet of the product), dusty, dirty or damp
environment.
Never touch the screen directly with your fingers. The acidic sweat
of the fingers may be difficult to remove and you may damage the
screen.
Do not touch the surface of the screen with sharp or abrasive
items (like pens or screwdrivers), as this could scratch the display.
The monitor is only for indoor use. Please do not install it in an
environment where it is exposed to oil, vapor, steam, moisture
and dust, but in a clean environment with low humidity.
Do not apply any pressure to the monitor screen as the screen
may break.
Do not install the monitor in a location that is exposed to
direct sunlight, dust, mechanical vibration or shock.
Always place the monitor on a flat surface.
Connect the power supply to the socket and plug the video cable
or HDMI/VGA cable to the desired signal source.
Disconnect the power plug from the power outlet under following
conditions:
- If you will not use it for an indefinite period of time.
- When the power cord or plug is damaged or
frayed.
- If the product has been dropped or the cabinet has been
damaged. - If the product exhibits a distinct change in performance,
this
indicates a need for service.
To clean the monitor's plastic case and display, a soft, lint-free cloth
can be used. Do not use any cleaning materials with abrasive
surfaces like scrub pads to clean your monitor.
To clean the display, a slightly damp cloth may be used to clean off
fingerprints or smudges. Please unplug the monitor first before
attempting cleaning with a damp cloth.
To clean the plastic case, a mild detergent may be used to clean
the surface. But please do not use too much detergent or water
as this
3
4
