Grundig DVD-Kit1, Service Manual

Page: 23 / 58

DVD-Kit1 Service- und Sonder-Funktionen / Service and Special Functions
GRUNDIG Service 2 - 3
Service and Special Functions
Software Upgrade
Attention: if a failure should occur during the software upgrade
(e.g. a mains failure), it may happen that the unit's functions and a
restart of the upgrade function are no longer possible. If this should
be the case, you must replace the integrated FLASH ICs (U13 / U15)
with preprogrammed ICs (see corresponding spare parts list).
– Insert the software upgrade CD, select programme position "03"
(AV3) and observe the hints on the picture screen.
– Carry out an initialization of the set.
Initialization of the Set
– Call up the "Easy Dialog" menu using the »
i
« button.
– Call up "Installation" using the 5 *1 button.
– Call up "Installation" menu page 2 using the »
P+
« or »
P-
« button.
– Call up the "Dealer service menu" using the 3 *1 button.
– Enter the digits "8 5 0 0".
– Call up "Special functions" using the
4 *1 button.
– Call up "DVD settings" using the
6 *1
button.
– Select "Factory Reset" using the 1 *1 button.
The software of the unit is reset to its factory settings. With that the
basic settings are loaded and the customer-specific data erased.
Service Menu
1. Functions of the buttons
For navigating in the Service menu, use the buttons on the remote
control.
i
Call up menu functions
P-
/
P+
Select menu functions.
a
Select higher menu function.
s
Activate menu function / next diagnostic page.
OK
Activate menu function.
Z
Select/exit higher menu function.
1 … 9 Activate menu function directly.
TXT
Exit demo function.
2. Calling up the Service menu
– Call up the "Easy Dialog" menu using the »
i
« button.
– Call up the "Installation" menu using the
5 *1
button.
– Call up "Installation" menu page 2 using the »
P+
« or »
P-
« button.
– Call up the "Dealer service menu" using the 3
*1
button.
– Enter the digits "8 5 0 0".
– Call up "Special functions" using the
4
*1
button.
– Call up "DVD settings" using the 6 *1 button.
– Call up "DVD settings" using the 2 *1 button.
– Call up "Installation" using the
5 *1
button.
– Call up "Additional functions" using the 5 *1 button.
– Call up the "Service menu" using the
3 *1
button.
The Service menu is subdivided in sub-menus according to the menu
overview (Point 3).
2.1 System information
– Call up the "Service menu" (Point 2).
– Select "System information" and call it up using the
1
*1
button.
The "System information" menu appears on the picture screen.
2.2 Dealer service menu
– Call up the "Service menu" (Point 2).
– Call up the "Dealer service menu" using the
2 *1
button.
– Enter the digits "8 5 0 0".
Note: the further menus can be called up according to the menu
overview (Point 3).
2.2.1 System settings
– System messages
When selecting a function or in the case of an error (e.g. disc,
handling or unit error), the system emits messages which are briefly
displayed in the bottom area of the picture screen.
– Diagnostics
The diagnostic functions are subdivided on several pages. To select
the desired page, enter its number (e.g. 2 for State) then confirm with
»
OK
«.
In diagnostic mode, the following functions are possible:
– Use the
s
button to select the next diagnostic page or to end the
diagnostic mode after the last page.
– Use the »
i
« to exit the diagnostic mode early.
The following diagnostic pages can be called up:
(1) Brief Disc and player state
(2) State Player state and error
(3) Tray Tray information
(4) Disc Disc information
(5) DVD DVD information
(6) DVD-V DVD video information
(7) DVD-A DVD audio information
(8) VCD VCD information
(9) CD Audio CD information
(10) File MP3 state
(11) File Info MP3 information
(12) Video Video state
(13) Aud 1 Audio information, page 1
(14) Aud 2 Audio information, page 2
(15) SP Subpicture information
(16) Angle Viewing angle information
(17) Title Titel information
(18) Track Track information
(19) Chptr Chapter information
(20) Index Index state
(21) Group DVD audio group information
(22) Dlist DVD audio ASVU list
(23) Repeat Repeat state
(24) Btns Buttons information
(25) Spd Playing speed
(26) Bitrt Bitrate
– Demo
When the demo function is activated, the eject button and the on/off
switch are locked.
Exit the Demo function in Stop mode: press the »
TXT
« button.
2.2.4 Video special
– Format conversion
The following format conversions are possible:
– Centre
– Auto
– 525 lines only
– 625 lines only
– Video signal
• DAC enable
The following digital-to-analog converters can be activated/deac-
tivated:
– DAC1 = Green/Y signal
– DAC2 = Blue/C signal
– DAC3 = Red signal (indication of the active switching state)
• NTSC format (60Hz format)
The following 60Hz formats can be selected:
– 525 lines, NTSC standard
– 525 lines, M-PAL standard
• NTSC composite signal
The following NTSC composite signal formats can be selected:
– NTSC USA
– NTSC Japan
– NTSC Other
• PAL format
The following PAL formats can be selected:
– PAL BDGHI
– PAL N
– PAL N-Combo
*1 Variant of the menu function selection:
Select using the »
P-
/
P+
« buttons then confirm with the »
OK
« button.
select
and choose
exit
back
System information
TV KIT
SW-Version: 0.65 / 257 Aug 17 2001
HW-Version: 0.03
Copyright: GRUNDIG AG 2001
http://www.grundig.com
NDV8501/DVD-2/Pantera-II rev 2 R:2
Unit
Software version
Hardware version
Hardware information
Regional code