83
Configuring the DigtaScan barcode reader
Default symbologies
In the default setting, only barcode symbology EAN-13 is
enabled.
If you use different symbologies, you can configure the
DigtaScan to work with them.
If you would like to optimize the code recognition, we rec-
ommend that you enable only those symbologies that you
actually use. The lower risk of confusion increases the
recognition accuracy.
Programming code table
We provide a table with programming codes in barcode
format.
You can open this PDF table with Acrobat Reader*.
You can print the required programming codes and then
use them to configure the barcode reader. If the table is not
supplied with your DigtaScan or you need codes it does
not contain, please visit our Internet download centre:
http://www.grundig-gbs.com
Our Internet site also lists our Customer Service address
and hotline number.
* Download for free at http://www.adobe.de/products/
acrobat/readstep.html
DIGTASCAN 404 BARCODE READER
______
