Grundig 48 VLE 666 BL, User Manual

Page: 20 / 35

21­
enGlIsH
10
To continue after pressing the WPS button on the access
point, press »  « (green).
– The “Connection to Gateway: Success” message will
be displayed.
11 Press »

« (green) to make sure that the network
connection is established with the current settings.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
12 Press » eXIT « to end the setting.
­Wireless­WPs­network­connection­with­PIn
1 Open the menu with » MenU «.
2
Activate the menu item »Settings« with »
oK
«.
3 Select the menu item »Network Configuration« with »
>
«
or »
<
« and press » oK « to confirm.
– »Network configuration« menu is displayed.
4 Select the line »Change Connection Type« with »
V
« or
»
Λ
« and press » oK « to confirm.
5 Select the option »Wireless WPS« with »
<
« or »
>
« and
press » oK « to confirm.
– WiFi warning screen will be displayed.
6­
Activate WiFi with »  « (green).
7 Select the line »WPS Type« with »
V
« or »
Λ
« and select
the option »PIN« with »
<
« or »
>
«.
Network Configuration
Timer Applications TV Settings
Back Ex it Ch ang e Area
Ch
an
ge Connection T
y
p
e
Wireless WPS
WiFi On
WPS Type PIN
Select Ac c ess Point N/A
Network Configuration AUTO
Ad
v
an
ced
8
Select the line »Select Access Point« with »
V
« or »
Λ
«
and press » oK « to confirm.
– Present WPS-supported wireless networks are scanned
to display in the »Select Access Point« menu.
9 Select the network that you want to connect with »
V
«,
»
Λ
«, »
<
« or »
>
« and press » oK « to confirm.
– 8-digit pin code is displayed in the wireless WPS
menu.
note:
7
Refer to the manual of your router to find out how the PIN
is entered via a PC.
10 Use a PC to enter the pin on the router (e.g. AVM
FRITZ!Box: menu item WLAN Settings... WPS) and save.
note:
7
The 8-digit PIN code must be entered in the modem
interface in 2 minutes; otherwise, connection of television
with the modem is cut.
11 Press »

« (green) to confirm the registration.
– The message “Connection to Gateway: Success”
appears.
neTWoRK­seTUP
­-------------------------------------------------------------------------------------------------------------
12 Press »  « (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection
To Gateway: Successfull«, »Internet Connection:
Successfull« messages and MAC address will be
displayed.
13 Press » eXIT « to end the setting.
Connecting­automatically­by­entering­the­
network­password
Use this method for establishing a connection if your router
does not support “WPS-PBC” or WPS PIN entry.
1 Open the menu with » MenU «.
2 Activate the menu item »Settings« with » oK «.
3
Select the menu item »Network Configuration« with »
>
«
or »
<
« and press »
oK
« to confirm.
– »Network configuration« menu is displayed.
Network Configuration
Timer Applications TV Settings
Ch a nge Connection T y p e Wired
Network Configuration AUTO
Ad
v
an
ced
OK
Back Ex it Con n ect Test Con n ection Ch ang e Area
4
Select the line »Change Connection Type« with »
V
« or
»
Λ
« and press »
oK
« to confirm.
5 Select the option »Wireless« with »
<
« or »
>
« and press
» oK « to confirm.
– WiFi warning screen will be displayed.
6­ Activate WiFi with »

« (green).
7 Select the line »Network Configuration« with »
V
« or
»
Λ
« and select the option »AUTO« with »
<
« or »
>
«.
8­
Select the line »Select Access Point« with »
V
« or »
Λ
«
and press »
oK
« to confirm.
– »Select Access Point« menu is displayed by scanning
available wireless networks.
9 Select the network that you want to connect with »
V
«,
»
Λ
«, »
<
« or »
>
« and press » oK « to confirm.
– Wireless connection password screen is displayed.
note:
7
For device to discover the wireless modem on the network,
the network name should support ASCII characters.
10 Select the required character with »
V
«, »
Λ
«, »
<
« or
»
>
« and move to the next character with » oK «.
– Using » shift «
➡
» oK «, you can switch between
uppercase letters / numbers and lowercase letters /
special characters.
– Select » « to delete the character entered and press
» oK « to confirm.