37
ENGLISH
SPECIALSETTINGS
-----------------------------------------------------------------------------------------------------
Tuningdigitaltelevisionstations
This search deletes all television stations in-
cluded in the channel list!
Tuningalldigitaltelevisionstations
withcableconnectionbyautotun-
ing
1
Open the menu with »
M
«.
– The »PICTURE« menu appears.
2
Select the »CHANNEL SETUP« menu with
»
r
« or »
e
«.
CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module
Not Inserted
Select
Back
Exit
Active Antenna Power
On
s
s
s
s
3
Select »Auto Tuning« with »
q
« or »
w
« and
confirm with »
OK
«.
4
Select »Country Selection« by pressing »
q
«
or »
w
« and press »
r
« or »
e
« to make the
setting.
5
Select the »Scan Type« with »
q
« and press
»
r
« or »
e
« to select the »DTV«.
6
Select the »TV Connection Type« with »
q
«.
Press »
r
« or »
e
« to select the »Cable« and
press »
OK
«.
– »Scan Type« is active.
7
Press »
r
« or »
e
« to select the scan type
»quick« or »Full«.
– »quick« scanning function sets the channels
according to the cable operator information
in the broadcasting signal.
– Network ID« performs the installation that
is suitable to your network. If you know
the Network ID, please enter it; otherwise
please select Auto Recommended settings
for »Frequency« or »Symbol Rate« is
»Auto«.
– Select »Full« if the scanning can not be
performed with »Fast« option.
– All current channels are set and stored in
»Full« scanning. This scanning process can
take a long time. This option is recommend-
ed if your cable operator does not support
fast scanning function.
8
Start the search with »
OK
«.
– The »Searching...« menu appears, and the
search for digital TV stations begins. This
may take several minutes depending on the
number of television stations received.
– The search is ended when the »Programme
Table« appears.
Note:
7
You can stop the search by pressing »
M
«.
