Grundig 19 VLC 2001 C, Manual

Page: 12 / 45

13­
ENGLISH
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
SOUND
Balance 0
●●●●●●●●●●●
AVL Off
Sound Type Stereo
Sound Mode Normal
Equalizer
Select
Back
Exit
Volume 29
Headphone 21
●●●
s
●●●●
7
»MPEG NR.« reduces any interference from
artefacts (pixel blocks) from digital stations
with MPEG compression (such as from DVB-
T receivers or DVD players).
7
You can only change the backlighting if the
»Dynamic Backlight« function is switched
off.
5 Press » M « to end the setting.
Audio­settings­
1
Open the menu with »
M
«.
– The »PICTURE« menu is displayed.
2 Select the »SOUND« menu with »
r
« or »
e
«
and confirm with » OK «.
Note:
7
Additional operations are explained in the
following sections.
Volume
1
Select »Volume« with »
q
« or »
w
« and adjust
the setting with »
r
« or »
e
«.
Balance
1
Select »Balance« with »
q
« or »
w
« and adjust
the setting with »
r
« or »
e
«.
Automatic­volume
The television channels broadcast at different
volumes. The automatic volume limiting (AVL)
function means the volume is kept the same
when you switch between channels.
1 Select »AVL« with »
q
« or »
w
« and then select
»On« with »
r
« or »
e
«.
Note:
7
If the »SRS« setting has been selected in the
»Sound Mode« line, the AVL line connot be
selected.
Stereo­/­two­channel,­mono
If the device receives two channel programmes,
e.g. a film with the original sound on sound
channel B (display: »Dual II«) and the dubbed
version on sound channel A (display: »Dual I«),
you can select the sound channel you desire.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the ste-
reo reception quality is poor.
1 Select »Sound Type« with »
q
« or »
w
« and
adjust the setting with »
r
« or »
e
«.
Stereo­width
Widens the audio output for stereo programmes
and improves the sound with mono reception.
1 Select »Sound Mode« with »
q
« or »
w
«.
2 Press »
r
« or »
e
« to select the setting »Spa-
tial«.