3
Introduction
PC Tool CU 300 kit
The PC Tool CU 300 kit you have just opened consists of:
• 1 CD ROM containing PC Tool CU 300 software, these installation and operating in-
structions and documents mentioned under references.
• 1 Grundfos CU 300 RS-232 cable for a connection of a PC to CU 300.
• 1 Registration card.
• These Installation and operating instructions.
System requirements
The minimum system requirements of the PC Tool CU 300 software are as follows:
• Windows 95/98/NT/ME/2000/XP.
• Pentium 100 MHz or higher.
• 16 Mb of RAM memory.
• 9 Mb of hard disk space.
• Monitor resolution 800 x 600 or higher.
• Mouse or other pointing device.
• RS-232 COM port.
Contents
These Installation and operating instructions cover the following topics:
References
For further information, please refer to...
• CU 300 Installation and operating instructions, 96427972 xxxx.
• G100 Installation and operation instructions, 96428779 xxxx.
• PC Tool Link adapter instructions, 96475749 xxxx.
Topic
See Page
Description
4
Installation
6
Getting started
8
The Main window
9
CU 300 operating and status reading
12
CU 300 installation configuration
15
Fault finding
18
