10
11
12
Vertical Pentagon Support
Bend area of hub where support hole is with hammer to align
with Vertical Pentagon Support. Attach VPS with (2) 3"
screws and 2" lag screw.
2" lag
screw
Sloped Glazing Supports
1-1/2" reveal
Both angles are precut; leave 1-1/2" reveal to attach
glazing panels later. Use 2-1/2" screws, 1 toe-nailed
in at bottom, 1 toe-nailed at the top, and 5 more
spaced evenly as shown.
At this time, move on to Step 9 of the dome
installation manual (Foundation Wall Trim
Strips). Leave extra length on the Horizontal
Trim; 3" past the cut doorway opening, and
do not attach to the door section until siding is
on.
(STAGE 2) Left and Right Bottom Pentagon Glazing Panels
trim this
edge
Trim outer edge to size. Use a circular saw or jigsaw with plywood
blade. Make sure to use eye and ear protection. Attach with 1-1/2"
ss screws and do not attach bottom yet. Space screws 1ft. apart.
33' Doorway Installation
6 of 12
3" screws
