Attaching to Upper Pentagon Strut.
Use (2) 3" screws.
Attach FSP to Base Strut. Use (3) 3" screws.
Door Framing
Horizontal Pentagon Supports
Attaching Front Sloping Piece Screw Pattern
33' Doorway Installation
4 of 12
(6) 2 1/2"
screws
4
5
6
Attach the 2 x 6 Door Frames to the wall studs and
front sloper, ensuring that they are plumb. Use shims if
necessary. Use 2 1/2" screws
Making sure it is level, set the Headers (2-2x4s on
edge) on the top of the door frame, but do not attach.
Mark the location of the back Header.
Periodically check that the opening is square by
measuring from the top left corner to the bottom right,
then measuring from the top right corner to the bottom
left. The framing is square when the measurements
match.
Bend hub with
hammer to align.
Wood is sent long; trim in field. Making sure the wood is
level, install Horizontal Pentagon Supports. 2" lag screw
goes through inside hub into the back side of the 2x4.
(2) 3" screws
(1) 2" lag screw
2" lag screw
mark
