33' Doorway Installation
5 of 12
Side Rafter Supports
Horizontal Glazing Support
Attach Horizontal Glazing Support just above
the Side Rafter Supports. Match the angle
of the Front Sloping Piece. Use 3" screws as shown.
7
8
9
Ensuring that it is level, place the Side Rafter Support at the mark from
Step 6. Mark and cut the angled end so that it is flush with the back edge
of the Front Sloping Piece. Attach Side Rafter Supports into Front
Sloping Piece, checking again for level. Use 2 1/2" screws as shown.
2-1/2" screws
3" screws
Tie plate with
tico nails.
2-1/2" screws
3" screws
Headers
Using (2) 3" screws on each end, first screw the back header
into the side rafter supports. Check that the top opening matches
the bottom (between 37 3/4" and 38 1/4"). Secure the front
header to the back header using (4) 2 1/2" screws along the length
of the header. Secure Headers, Side Rafter Supports, and Door
Frames together using tie plates and tico nails on both sides.
