39
40
6.4.2 Use of RS232 port
RS232 port is mainly used for monitoring connection with computer, users can
monitor, set parameters and update the software of the machine through RS232
connection with machine and PC, using the shinebus software developed by Growatt.
Removing RS232 cover first:
Customer can use shinebus to monitor SPH by PC
Before use RS232 communication, you should make sure the follow PIN1 and PIN2
are OFF:
The wiring diagram is as follows:
6.4.3 The SPH's monitoring
The SPH provide USB interface. Users can through the following communication
solution to monitor the SPH. For example Using Wi-Fi-X monitor SPH as follow:
Note:
This kind of monitoring can only be used by the monitor of Growatt's Shineserver
/shine phone provided by the company. Through RS232 interface connect to Wi-Fi-
S/shinelink/GPRS, use computer terminal/or mobile phone for data monitoring.
Plug in the communication module and tighten the screws as follow.
How to register account, please turn to the usermanual of shine Wi-Fi-X.
The inverter side
The inverter side
The inverter side
The inverter side
Remove
▲
up
Installate
1
2
