Growatt SPH3000TL BL-US, Installation & Operation Manual

Page: 19 / 35

31 32
6.3.2 LED and button instruction
A B
C
D
E
Location Description
A LED
B ESC- button(cancel control)
C Down-button
D Enter-button
E UP-button
Notice:
LED showing status of SPH, it has two colors, one is green and another is red. Please
turn to 3.1 and read the detail of LED.
6.3.3 LCD display column
LCD display column is used to show the current state, basic information and fault
information. Also include language setting, program charging/discharging priority and
system time. On default condition will take turns to display the information.
Vb/Cb:50V/40%
Normal
B
A
The A line's concluding information as follow:
1. Standby state: SPH is in standby state. No error in this state, but for other reasons,
make it in a wait state.
2. Normal state: SPH is normal working state.
3. Checking state: SPH is in self-check state, if there is no error or warning, SPH will go
to normal state or standby state. Otherwise it will go to fault state.
4. Programming state: SPH is in updating firmware state.
5. Fault state: SPH has fault information, it will be in stopped operational protection
state.
The B line's information as follow:
In normal, it will turn on page automatically, when pushing the button “UP”, the order
of the paging information as follow:
WorkMode
Input&Output Para
WorkMode
(Lead acid)Vb:xx.xV
(Lithium)Vb/Cb:xx.xV/xxx%
WorkMode
Vpv:xxxV/xxxV
WorkMode
Ppv:xxxxW/xxxxW
PV1/PV2 voltage
Battery
information
WorkMode
Grid:xxxV/xxHz
WorkMode
EPS:xxxV/xxHz
WorkMode
Po:xxxxW/xxxxVA
Grid information
Output AC
Power
EPS output voltage
WorkMode
EPS:xxxxW/xxxxVA
WorkMode
Pbat: (+/-)XXXX W
Battery power
EPS output power
WorkMode
Epv_d:xxxx.x KWh
WorkMode
Epv_a:xxxx.x KWh
WorkMode
Ec_d:xxxx.x KWh
WorkMode
Ec_a:xxxx.x KWh
WorkMode
Ed_d:xxxx.x KWh
WorkMode
Ed_a:xxxx.x KWh
WorkMode
SerNo:xxxxxxxxxx
PV1/PV2 today energy
PV1/PV2 total energy
PV1/PV2 input power
Battery Charge_today
energy
WorkMode
Pm:
(+/-)XXXX
W
Power to grid or to user
Battery Charge_total
energy
Battery Discharge_today
energy
Battery Discharge_total
energy
WorkMode
20XX/XX/XX/ XX:XX
System Time
WorkMode
Model:xxxxxxxxxx
WorkMode
FW Version:xxxx
Serial number
Machine model
Firmware version
To grid is -
To user is +
WorkMode
Eac_d:xxxx.x KWh
WorkMode
Eac_a:xxxx.x KWh
AC output_Etoday
AC output_Etotal
WorkMode
Per_Load: %
EPS load Ratio
WorkMode
Eam_a:
(+/-)XXXXK
Wh
AC output_EtoTal @
RGM meter
statistics